Innokin Support
- Total activity 271
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 65
- Subscriptions 105
Comments
Votes on activity by Innokin Support-
Sorry, there're no firmware updates available for the CoolFire Z60.
-
Hi, my friend. Sorry, it sounds like you need a replacement device. If "low res" is still showing with different tanks and coils, the 510 connector within the device is likely defective.
-
Hi, Dale. It sounds like you have each of your MVP5 devices on "wattage - normal" mode, but the wattage is set to different amounts. Can you tell me what coil you are using? And please adjust the w...
-
Hi, Niamh. The wattage lock feature is meant to prevent accidental power changes. They can unlock using the power button and minus button combination, adjust to their wattage of choice, and then ke...
-
To open a vape tank and replace the glass, you'll typically need a set of basic tools designed for this purpose. Here's what you might need: Rubber Gloves: These will help you get a better grip a...
-
Thank you for reaching out to us. The Kroma-R mod can actually fire down to 0.05 ohms, not just 0.5 ohms. And the ZF coils are .2 and .3ohms, not 0.4. However, overall the Kroma-R is suitable to c...
-
Hi, Ferry I'm so sorry. Unfortunately, they are not compatible to my knowledge. And will likely need to purchase another Zenith II if you don't stock spare glass in Indonesia. Best regards, Innoki...
-
Hi, Mike. Sorry to hear about the trouble you're having with your MVP5. Please get in touch with the support team at support@innokin.com.
-
Thanks for contacting Innokin, we are so sorry to hear about the issue which you have reported. Please reach out to us at support@innokin.com. My apologies again for the inconvenience.
-
Sounds like everything is mostly normal... the cable and charger will likely get hot due to the max amperage of 1A but should be the same heat as a 2A charger. It sounds like their 1A charger may n...